MBRF30150CT

MBRF30150CT

Category: Available (Qty:9999999)
For more information, visit our official website at utsource.us

Description

BUY MBRF30150CT https://www.utsource.net/itm/p/12603566.html

Parameter Symbol Min Typ Max Unit Description
Average Rectified Current IF(AV) - 150 - A Continuous average rectified current
Peak Repetitive Reverse Voltage VRRM - 300 - V Maximum peak non-repetitive reverse voltage
Peak Surge Current IFSM - 220 - A Non-repetitive peak surge current
Forward Voltage Drop VF 0.7 - 1.1 V (at IF=15A) Voltage drop across diode when forward biased
Junction Temperature TJ -40 - 150 掳C Operating junction temperature range
Storage Temperature TSTG -55 - 150 掳C Storage temperature range
Thermal Resistance, Junction to Case R胃JC - 1.6 - 掳C/W Thermal resistance from junction to case

Instructions for Use:

  1. Mounting:

    • Ensure proper heat sinking to maintain the junction temperature within the specified limits.
    • Use a thermal compound between the diode and the heat sink for better thermal conductivity.
  2. Electrical Connections:

    • Connect the diode with correct polarity. The cathode (positive) is typically marked on the diode.
    • Ensure all connections are secure to prevent mechanical stress and potential failure.
  3. Surge Current Handling:

    • Do not exceed the peak surge current (IFSM) for more than a few milliseconds to avoid damage.
    • Use derating factors if the diode will be subjected to frequent surges.
  4. Reverse Voltage:

    • Ensure that the peak repetitive reverse voltage (VRRM) is not exceeded to prevent breakdown.
    • Consider using a snubber circuit to protect against voltage spikes.
  5. Operating Temperature:

    • Operate the diode within the specified junction temperature range to ensure reliable performance.
    • Monitor the temperature during operation and adjust the cooling if necessary.
  6. Storage:

    • Store the diode in a dry, cool environment within the storage temperature range to prevent damage.
    • Handle with care to avoid mechanical damage or static discharge.
  7. Testing:

    • Test the diode using a multimeter or diode tester to ensure it is functioning correctly before installation.
    • Regularly inspect the diode for signs of wear or damage during maintenance.
(For reference only)

More detail about Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited