Description
BUY AO4614-MS(5pcs) https://www.utsource.net/itm/p/12597226.html
| Parameter |
Description |
Value |
| Part Number |
Component Identifier |
AO4614-MS |
| Quantity |
Number of Units |
5 pcs |
| Type |
Component Type |
MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) |
| Package |
Physical Package |
SOT-23-3L |
| VDS (Max) |
Drain-to-Source Voltage |
30V |
| VGS (Max) |
Gate-to-Source Voltage |
卤12V |
| ID (Max) |
Continuous Drain Current |
1.7A (at 25掳C) |
| RDS(on) |
On-State Resistance |
0.08惟 (at VGS = 4.5V) |
| Power Dissipation |
Maximum Power Dissipation |
410mW (at 25掳C) |
| Operating Temperature Range |
Temperature Range for Operation |
-40掳C to 125掳C |
| Storage Temperature Range |
Temperature Range for Storage |
-65掳C to 150掳C |
| Gate Charge |
Total Gate Charge |
12nC |
| Input Capacitance |
Capacitance at Input |
30pF (at VDS = 10V) |
| Output Capacitance |
Capacitance at Output |
110pF (at VDS = 10V) |
| Reverse Transfer Capacitance |
Capacitance from Drain to Source |
10pF (at VDS = 10V) |
Instructions:
Handling and Storage:
- Store the AO4614-MS in a dry, cool place within the specified storage temperature range.
- Handle with care to avoid static discharge, which can damage the MOSFET.
Mounting:
- Ensure that the PCB layout provides adequate heat dissipation to prevent the MOSFET from exceeding its maximum operating temperature.
- Follow standard soldering procedures to avoid thermal shock and ensure good electrical connections.
Electrical Connections:
- Connect the Drain (D), Source (S), and Gate (G) terminals according to the circuit diagram.
- Ensure that the gate voltage does not exceed the maximum VGS rating to prevent damage to the device.
Testing:
- Use a multimeter or an appropriate test setup to verify the continuity and resistance values before and after installation.
- Test the device under load conditions to ensure it operates within the specified parameters.
Safety:
- Always use appropriate safety equipment when handling electronic components.
- Ensure that the circuit is powered down before making any physical connections or modifications.
Troubleshooting:
- If the MOSFET fails to operate correctly, check for proper connections, correct polarity, and absence of short circuits.
- Verify that the supply voltages and currents are within the specified limits.
For more detailed information, refer to the datasheet provided by the manufacturer.
(For reference only)
More detail about Utsource Holding Company Limited
