LMR14020SDDAR

BUY LMR14020SDDAR https://www.utsource.net/itm/p/12541875.html

Instructions for Use:

1. Input Voltage (VIN):

   • Ensure the input voltage is within the range of 3.0V to 60V.
   • The input voltage should be stable and free from excessive noise.

2. Output Voltage (VOUT):

   • The output voltage can be adjusted up to 50V.
   • Use an external resistor network to set the desired output voltage according to the datasheet formula.

3. Output Current (IOUT):

   • The device can provide a continuous output current of up to 2A.
   • For higher current applications, ensure proper heat dissipation and thermal management.

4. Quiescent Current (IQ):

   • The quiescent current is typically 70渭A when there is no load and the input voltage is 12V.
   • This low quiescent current helps in reducing power consumption in low-power systems.

5. Dropout Voltage (VDROPOUT):

   • The dropout voltage is typically 1.2V at an output current of 1A.
   • Ensure that the input voltage is at least 1.2V higher than the output voltage to maintain regulation.

6. Load Regulation:

   • The load regulation is 0.1% over the output current range from 0mA to 2A.
   • This ensures minimal changes in output voltage with varying load conditions.

7. Line Regulation:

   • The line regulation is 0.01%/V over the input voltage range from 3V to 60V.
   • This ensures minimal changes in output voltage with varying input voltage.

8. PSRR (Power Supply Rejection Ratio):

   • The PSRR is 70dB at 1kHz, which helps in rejecting input voltage variations and noise.
   • This is particularly important in noisy environments or where the input voltage may fluctuate.

9. Operating Temperature (TJ):

   • The device can operate at junction temperatures ranging from -40掳C to 125掳C.
   • Ensure proper heat sinking if operating at high temperatures or high output currents.

10. Storage Temperature (TSTG):

    • The device can be stored at temperatures ranging from -65掳C to 150掳C.
    • Store the device in a dry, cool place to avoid damage.

Additional Notes:

• Always refer to the specific application notes and datasheet for detailed information and recommended circuit designs.
• Ensure all components used in the circuit are rated appropriately for the operating conditions.
• Proper PCB layout and component selection are crucial for optimal performance and reliability.