STP10NM60N: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Test Conditions	Min	Typ	Max	Unit
Drain-Source Voltage	V_DS		-	600	-	V
Gate-Source Voltage	V_GS		-20	0	20	V
Continuous Drain Current	I_D	T_C = 25掳C	-	10	-	A
Pulse Drain Current	I_Dpeak	t_p = 10 渭s, T_C = 25掳C	-	35	-	A
Gate Charge	Q_G	V_DS = 600 V, I_D = 10 A	-	75	-	nC
Input Capacitance	C_iss	V_GS = 15 V	-	4200	-	pF
Output Capacitance	C_oss	V_DS = 600 V	-	850	-	pF
Reverse Transfer Capacitance	C_rss	V_DS = 600 V	-	180	-	pF
On-State Resistance	R_DS(on)	V_GS = 10 V, I_D = 10 A	-	1.5	-	惟
Gate-Threshold Voltage	V_GS(th)	I_D = 1 mA	2.5	3.5	4.5	V
Total Power Dissipation	P_TOT	T_C = 25掳C	-	180	-	W
Junction Temperature	T_J		-55	-	175	掳C
Storage Temperature	T_STG		-55	-	175	掳C

Mounting and Handling:
- Handle the device with care to avoid mechanical damage.
- Ensure proper heat sinking to manage the junction temperature, especially during high power dissipation.
Electrical Connections:
- Connect the drain (D), source (S), and gate (G) terminals correctly.
- Apply appropriate gate drive voltages to ensure reliable switching.
Thermal Management:
- Ensure that the device is mounted on a heatsink or a PCB with sufficient thermal conductivity.
- Monitor the junction temperature to prevent overheating.
Gate Drive:
- Use a gate resistor to control the switching speed and reduce electromagnetic interference (EMI).
- Ensure the gate voltage does not exceed the maximum ratings to avoid damage.
Overcurrent Protection:
- Implement overcurrent protection to prevent damage from excessive drain current.
Storage and Handling:
- Store the device in a dry, cool environment.
- Follow ESD (Electrostatic Discharge) precautions to avoid damage to the device.
Testing:
- Perform initial testing under controlled conditions to verify the device parameters.
- Regularly inspect the device for signs of wear or damage.
Compliance:
- Ensure that the device complies with all relevant safety and regulatory standards for your application.

(For reference only)