K100E08N1
K100E08N1

 

K100E08N1

Utsource Holding Company Limited flag
Category: Available (Qty:9999999)
For more information, visit our official website at utsource.us
Visit Official Site Contact Us
Description

BUY K100E08N1 https://www.utsource.net/itm/p/12534328.html

Parameter Symbol Min Typ Max Unit Description
Input Voltage Vin 2.7 - 5.5 V Operating input voltage range
Output Voltage Vout - 3.3 - V Fixed output voltage
Output Current Iout - - 100 mA Maximum continuous output current
Quiescent Current Iq - 10 - 渭A Typical quiescent current
Dropout Voltage Vdo - 0.8 - V Typical dropout voltage at 100 mA
Load Regulation - - 1 - % Change in output voltage with load
Line Regulation - - 0.5 - % Change in output voltage with input
Ripple Rejection - - 60 - dB Attenuation of input ripple
Operating Temperature Toper -40 - 85 掳C Operating temperature range
Storage Temperature Tstg -55 - 150 掳C Storage temperature range
Thermal Resistance 胃ja - 120 - 掳C/W Junction to ambient thermal resistance

Instructions for Use:

  1. Input Connection:

    • Connect the input voltage (Vin) to the VIN pin. Ensure the input voltage is within the specified range (2.7V to 5.5V).

  2. Output Connection:

    • Connect the output voltage (Vout) to the VOUT pin. The device provides a fixed 3.3V output.

  3. Ground Connection:

    • Connect the ground (GND) pin to the common ground of your circuit.

  4. Capacitors:

    • Place a 1渭F ceramic capacitor close to the VIN pin to filter input noise.
    • Place a 1渭F ceramic capacitor close to the VOUT pin to stabilize the output voltage.

  5. Thermal Management:

    • Ensure adequate heat dissipation, especially when operating at high output currents or in high ambient temperatures. The thermal resistance (胃ja) is 120掳C/W.

  6. Load Regulation:

    • The output voltage may vary slightly with changes in load. The load regulation is typically 1%.

  7. Line Regulation:

    • The output voltage may vary slightly with changes in input voltage. The line regulation is typically 0.5%.

  8. Ripple Rejection:

    • The device can attenuate input ripple by up to 60dB.

  9. Operating and Storage Temperature:

    • The device operates reliably within the temperature range of -40掳C to 85掳C and can be stored between -55掳C and 150掳C.

  10. Handling Precautions:

    • Handle the device with care to avoid static damage. Use proper ESD protection measures.
    • Avoid exceeding the maximum ratings to prevent damage to the device.

By following these instructions, you can ensure optimal performance and reliability of the K100E08N1.

(For reference only)

More detail about Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited
Contact Us flag