STD03N,STD03P

STD03N,STD03P

Category: Available (Qty:9999999)
For more information, visit our official website at utsource.us

Description

BUY STD03N,STD03P https://www.utsource.net/itm/p/12532830.html

Below is the parameter table for the STD03N and STD03P MOSFETs, along with some basic instructions for their use.

Parameter Table

Parameter Symbol STD03N (N-Channel) STD03P (P-Channel) Unit
Drain-Source Voltage ( V_ ) 30 -30 V
Gate-Source Voltage ( V_ ) 卤20 卤20 V
Continuous Drain Current ( I_ ) 3.0 3.0 A
Pulsed Drain Current ( I_{D(pulse)} ) 9.0 9.0 A
RDS(on) at VGS = 10V/(-10V) ( R_{DS(on)} ) 0.055 0.085
Total Power Dissipation ( P_ ) 1.2 1.2 W
Junction Temperature ( T_J ) -40 to 150 -40 to 150 掳C
Storage Temperature ( T_ ) -40 to 150 -40 to 150 掳C

Instructions

General Usage

  1. Check the Polarity: Ensure that the polarity of the MOSFET matches the circuit requirements. The STD03N is an N-channel MOSFET, and the STD03P is a P-channel MOSFET.
  2. Heat Sinking: If the MOSFET will be operating at high currents or in high-temperature environments, consider using a heat sink to manage the junction temperature.
  3. Gate Drive: Ensure that the gate voltage is within the specified limits (( V_ )). For the STD03N, apply a positive voltage to turn it on, and for the STD03P, apply a negative voltage.
  4. Source Connection: For the STD03N, connect the source to ground (or the most negative point in the circuit). For the STD03P, connect the source to the positive supply voltage.
  5. Drain Connection: Connect the drain to the load or the point where current will flow through the MOSFET.

Specific Considerations

Example Circuit

By following these parameters and instructions, you can effectively use the STD03N and STD03P MOSFETs in your circuits.

(For reference only)

More detail about Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited