2SJ378

2SJ378

Category: Available (Qty:9999999)
For more information, visit our official website at utsource.us

Description

BUY 2SJ378 https://www.utsource.net/itm/p/12523991.html

Parameter Symbol Min Typ Max Unit Condition
Collector-Emitter Voltage VCE - - 100 V -
Collector-Base Voltage VCB - - 100 V -
Emitter-Base Voltage VEB - - 5 V -
Collector Current IC - - 15 A -
Base Current IB - - 1.5 A -
Power Dissipation PT - - 130 W TC = 25掳C
Storage Temperature TSTG -55 - 150 掳C -
Operating Temperature TA -55 - 150 掳C -
Thermal Resistance RthJC - 1.2 - 掳C/W Junction to Case

Instructions for Use:

  1. Handling:

    • Handle the 2SJ378 with care to avoid mechanical damage.
    • Use appropriate ESD (Electrostatic Discharge) protection to prevent damage from static electricity.
  2. Mounting:

    • Ensure proper heat sinking to manage thermal resistance and maintain the junction temperature within safe limits.
    • Follow the recommended mounting torque for screws to avoid damaging the device.
  3. Biasing:

    • Ensure that the base current is within the specified limits to avoid overheating and potential damage.
    • Use appropriate biasing circuits to maintain stable operation under varying load conditions.
  4. Operation:

    • Do not exceed the maximum ratings for collector-emitter voltage, collector current, and power dissipation.
    • Monitor the operating temperature to ensure it remains within the specified range to prevent thermal runaway.
  5. Storage:

    • Store the device in a dry, cool environment to prevent moisture-related damage.
    • Keep the device away from direct sunlight and sources of high temperature.
  6. Testing:

    • Use appropriate test equipment and methods to verify the performance parameters of the 2SJ378.
    • Refer to the datasheet for specific test conditions and procedures.
  7. Soldering:

    • Use a controlled soldering process to avoid excessive heat that could damage the device.
    • Allow the device to cool down before testing or further handling.
  8. Safety:

    • Always follow safety guidelines when working with high voltages and currents.
    • Use protective equipment such as gloves and safety glasses when handling the device.
(For reference only)

More detail about Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited