KSC2073TU

BUY KSC2073TU https://www.utsource.net/itm/p/12426931.html

Instructions for Using KSC2073TU

1. Input Connection:

   • Connect the input voltage (VIN) between 4.5V and 40V to the input terminal.
   • Ensure the input voltage is stable and within the specified range to avoid damage.

2. Output Connection:

   • The output voltage (VOUT) is fixed at 3.3V.
   • Connect the load to the output terminal, ensuring the current does not exceed 3A continuously.

3. Heat Dissipation:

   • The device has a dropout voltage of 0.3V at 3A. Ensure adequate heat dissipation if operating at high currents or in high ambient temperatures.
   • Use a heatsink if necessary, especially when operating near the maximum current.

4. Efficiency:

   • The efficiency is typically 92% at 12V input and 2A output. Monitor the power consumption and ensure it aligns with the expected values.

5. Quiescent Current:

   • The quiescent current is 10μA at no load. This is important for low-power applications.

6. Regulation:

   • The load regulation is 0.5% from 0 to 3A, and the line regulation is 0.1% from 4.5V to 40V. These parameters ensure stable output voltage under varying conditions.

7. Ripple and Noise:

   • The ripple and noise are 20mV RMS at a 20MHz bandwidth. Use appropriate filtering if lower noise levels are required.

8. Temperature Considerations:

   • The operating temperature range is -40°C to 85°C. Ensure the device is used within this range to maintain performance and reliability.
   • The storage temperature range is -55°C to 150°C. Store the device in a suitable environment to prevent damage.

9. Mounting:

   • Mount the device on a PCB with proper soldering techniques. Ensure good thermal connection to the PCB for efficient heat dissipation.

10. Testing:

    • Before deploying the device in a final application, test it under various conditions to ensure it meets the required specifications and performance criteria.