Description
BUY BZG03C160(100pcs) https://www.utsource.net/itm/p/12368904.html
| Parameter |
Description |
| Part Number |
BZG03C160 |
| Quantity |
100 pcs |
| Type |
Zener Diode |
| Zener Voltage (Vz) |
16.0 V 卤5% at 5mA (Izt) |
| Maximum Zener Current (Izm) |
200 mA |
| Power Dissipation (Pz) |
500 mW at 25掳C |
| Forward Voltage (Vf) |
1.0 V max at 100 mA |
| Reverse Current (Ir) |
100 nA max at 16.0 V |
| Operating Temperature (Tj) |
-55掳C to +150掳C |
| Storage Temperature (Ts) |
-65掳C to +150掳C |
| Package Type |
DO-35 (Glass Passivated) |
| Lead Finish |
Tin (Sn) |
| RoHS Compliance |
Yes |
Instructions for Use:
Handling and Storage:
- Store in a dry, cool place to prevent moisture damage.
- Handle with care to avoid mechanical stress on the leads and body.
Mounting:
- Ensure proper orientation during soldering. The cathode (shorter lead) should be connected to the positive side of the circuit.
- Preheat the PCB to reduce thermal shock.
- Soldering temperature should not exceed 260掳C for more than 10 seconds.
- Allow the diode to cool naturally after soldering.
Electrical Connections:
- Connect the Zener diode in reverse bias across the load to regulate voltage.
- Use a current-limiting resistor to protect the diode from exceeding its maximum Zener current (Izm).
Testing:
- Test the diode using a multimeter set to the diode test mode to ensure it is functioning correctly.
- Measure the forward voltage drop (Vf) and reverse breakdown voltage (Vz) to verify specifications.
Safety:
- Do not exceed the maximum power dissipation (Pz) to avoid overheating and potential failure.
- Ensure adequate heat sinking if operating at high currents or in high ambient temperatures.
Disposal:
- Dispose of the diode according to local environmental regulations.
(For reference only)
More detail about Utsource Holding Company Limited
