Description
BUY AP18P10GI,18P10GI https://www.utsource.net/itm/p/11765719.html
| Parameter |
Symbol |
Conditions |
Min |
Typ |
Max |
Unit |
| Input Voltage |
VIN |
Continuous |
2.7 |
|
5.5 |
V |
| Output Voltage |
VOUT |
Fixed |
|
3.3 |
|
V |
| Output Current |
IOUT |
Continuous |
|
|
1.0 |
A |
| Quiescent Current |
IQ |
VIN = 5V |
|
2.5 |
|
μA |
| Dropout Voltage |
VDROPOUT |
IOUT = 500mA |
|
200 |
|
mV |
| Power Supply Rejection Ratio |
PSRR |
f = 1kHz, VIN = 5V |
|
60 |
|
dB |
| Operating Temperature |
TOPR |
|
-40 |
|
85 |
°C |
| Storage Temperature |
TSTG |
|
-65 |
|
150 |
°C |
Instructions for Use:
- Input Voltage Range: Ensure the input voltage is within the range of 2.7V to 5.5V.
- Output Configuration: The output voltage is fixed at 3.3V. No external components are required for setting the output voltage.
- Current Limiting: The device can provide up to a maximum of 1.0A continuously. Ensure the load does not exceed this limit.
- Thermal Considerations: Place the device in an area with adequate heat dissipation if operating near the maximum current or in high ambient temperatures.
- Power Supply Rejection Ratio (PSRR): For optimal performance, especially in noisy environments, consider placing a capacitor close to the input pins.
- Operating and Storage Temperature: Operate within the temperature range of -40°C to 85°C. Store within the temperature range of -65°C to 150°C.
- Installation: Follow standard surface mount technology (SMT) procedures for installation. Ensure proper handling to avoid damage from electrostatic discharge (ESD).
(For reference only)
More detail about Utsource Holding Company Limited
