Description
BUY A2151A,C6011A https://www.utsource.net/itm/p/11725077.html
| Parameter |
A2151A |
C6011A |
| Type |
Hall Effect Sensor |
Hall Effect Sensor |
| Supply Voltage |
4.5V to 24V |
4.5V to 24V |
| Operating Current |
10mA (max) |
10mA (max) |
| Output Type |
Open Collector |
Open Collector |
| Output Voltage |
0V (Low), Supply Voltage (High) |
0V (Low), Supply Voltage (High) |
| Magnetic Sensitivity |
-50G to -100G |
-50G to -100G |
| Response Time |
<1μs |
<1μs |
| Operating Temperature |
-40°C to 150°C |
-40°C to 150°C |
| Storage Temperature |
-55°C to 150°C |
-55°C to 150°C |
| Package |
TO-92 |
TO-92 |
| Polarity |
Bipolar |
Bipolar |
Instructions for Use
A2151A
- Power Supply: Connect the Vcc pin to a power supply within the range of 4.5V to 24V.
- Ground Connection: Connect the GND pin to the ground of your circuit.
- Output Connection: Connect the OUT pin to the input of your microcontroller or other device. The output is open collector, so you may need a pull-up resistor to the supply voltage.
- Magnetic Field: Place a magnetic field near the sensor to trigger the output. The sensor will switch when the magnetic field strength is within the specified range (-50G to -100G).
- Temperature Considerations: Ensure that the operating temperature is within the specified range (-40°C to 150°C).
C6011A
- Power Supply: Connect the Vcc pin to a power supply within the range of 4.5V to 24V.
- Ground Connection: Connect the GND pin to the ground of your circuit.
- Output Connection: Connect the OUT pin to the input of your microcontroller or other device. The output is open collector, so you may need a pull-up resistor to the supply voltage.
- Magnetic Field: Place a magnetic field near the sensor to trigger the output. The sensor will switch when the magnetic field strength is within the specified range (-50G to -100G).
- Temperature Considerations: Ensure that the operating temperature is within the specified range (-40°C to 150°C).
(For reference only)
More detail about Utsource Holding Company Limited
