Description
BUY BCR8PM-12LG,BCR8PM https://www.utsource.net/itm/p/11724640.html
| Parameter |
BCR8PM-12LG |
BCR8PM |
| Type |
Photocoupler |
Photocoupler |
| Package |
12-Lead SOIC |
8-Lead SOIC |
| Input Device |
GaAs Photodiode |
GaAs Photodiode |
| Output Device |
Silicon NPN Transistor |
Silicon NPN Transistor |
| Isolation Voltage (VISO) |
5000 Vrms (1 min) |
5000 Vrms (1 min) |
| Collector-Emitter Voltage (VCE) Max |
70 V |
70 V |
| Collector Current (IC) Max |
50 mA |
50 mA |
| Forward Current (IF) Max |
30 mA |
30 mA |
| Storage Temperature (Tstg) |
-40掳C to +110掳C |
-40掳C to +110掳C |
| Operating Temperature (Topr) |
-40掳C to +105掳C |
-40掳C to +105掳C |
| Current Transfer Ratio (CTR) |
50% to 300% (Typical) |
50% to 300% (Typical) |
| Propagation Delay Time (tpd) |
1 渭s (Max) |
1 渭s (Max) |
| Rise Time (tr) |
0.5 渭s (Max) |
0.5 渭s (Max) |
| Fall Time (tf) |
0.5 渭s (Max) |
0.5 渭s (Max) |
| Mounting Type |
Surface Mount |
Surface Mount |
Instructions:
Handling Precautions:
- Avoid applying excessive force or torque during soldering.
- Use appropriate temperature and time settings for soldering to prevent damage to the device.
Storage:
- Store in a dry, cool place away from direct sunlight and corrosive substances.
- Follow the recommended storage temperature range to ensure reliability.
Electrical Connections:
- Ensure proper polarity when connecting the input and output leads.
- Use appropriate current-limiting resistors to avoid exceeding the maximum forward current (IF) and collector current (IC).
Mounting:
- Ensure that the board is clean and free of contaminants before mounting.
- Follow the recommended PCB layout guidelines to minimize noise and interference.
Testing:
- Use a suitable test setup to verify the functionality of the photocoupler.
- Measure the current transfer ratio (CTR) and propagation delay time (tpd) to ensure the device meets the specified parameters.
Safety:
- Handle with care to avoid static discharge, which can damage the internal components.
- Ensure that the isolation voltage (VISO) is not exceeded to maintain safety and performance.
Compliance:
- Ensure that the device complies with relevant safety and regulatory standards for your application.
(For reference only)
More detail about Utsource Holding Company Limited
