Description
BUY PDTC123ET215 https://www.utsource.net/itm/p/11722978.html
| Parameter |
Description |
Value |
Unit |
| Part Number |
Product Identifier |
PDTC123ET215 |
- |
| Type |
Device Type |
MOSFET |
- |
| Configuration |
Channel Configuration |
N-Channel |
- |
| VDS |
Drain-to-Source Voltage |
60 |
V |
| RDS(on) |
On-State Resistance at VGS = 10V |
4.5 |
mΩ |
| ID |
Continuous Drain Current |
18 |
A |
| VGS(th) |
Gate Threshold Voltage |
2.5 to 4.5 |
V |
| Qg |
Total Gate Charge |
67 |
nC |
| Package |
Component Package Type |
TO-252 (DPAK) |
- |
| Operating Temp |
Operating Temperature Range |
-55 to 150 |
°C |
Instructions:
- Installation: Ensure the device is handled with care to avoid damage to the leads and body. Use appropriate tools for mounting.
- Soldering: Follow standard soldering practices. Avoid excessive heat to prevent damage. Recommended soldering temperature: 260°C for no more than 10 seconds.
- Handling: Use ESD-safe procedures when handling the device to prevent electrostatic discharge damage.
- Storage: Store in a dry, cool place away from direct sunlight and corrosive substances.
- Application: Verify that the operating conditions (voltage, current, temperature) do not exceed the specified limits.
- Testing: Before final assembly, test the device under typical operating conditions to ensure functionality.
(For reference only)
More detail about Utsource Holding Company Limited
