P7NK80ZFP STP7NK80ZFP: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Drain-Source Voltage	V_DS	-	-	80	V
Gate-Source Voltage	V_GS	-15	-	15	V
Continuous Drain Current	I_D	-	7	-	A	@ T_C = 25掳C
Pulse Drain Current	I_D(p)	-	35	-	A	@ T_C = 25掳C, t_p = 10 渭s, Duty Cycle = 1%
Power Dissipation	P_TOT	-	-	64	W	@ T_C = 25掳C
Junction Temperature	T_J	-	-	150	掳C
Storage Temperature	T_STG	-55	-	150	掳C
Gate Charge	Q_G	-	19	-	nC	@ V_GS = 10V, I_D = 7A
Input Capacitance	C_iss	-	1400	-	pF	@ V_DS = 15V, f = 1 MHz
Output Capacitance	C_oss	-	450	-	pF	@ V_DS = 15V, f = 1 MHz
Reverse Transfer Capacitance	C_rss	-	110	-	pF	@ V_DS = 15V, f = 1 MHz
On-State Resistance	R_DS(on)	-	0.016	-	惟	@ V_GS = 10V, I_D = 7A
Threshold Voltage	V_GS(th)	1.5	2.5	4.0	V	@ I_D = 250 渭A

Handling Precautions:
- The device is sensitive to electrostatic discharge (ESD). Use proper ESD protection measures during handling.
- Avoid exceeding the maximum ratings specified in the table to prevent damage.
Mounting:
- Ensure good thermal management by using appropriate heat sinks or cooling solutions, especially when operating at high power levels.
- Follow the recommended PCB layout guidelines to minimize parasitic inductances and improve performance.
Gate Drive:
- Use a gate resistor to control the switching speed and reduce electromagnetic interference (EMI).
- Ensure the gate voltage (V_GS) is within the specified range to avoid damaging the device or compromising its performance.
Thermal Considerations:
- Monitor the junction temperature (T_J) to ensure it does not exceed the maximum rating.
- Use thermal simulation tools to optimize the thermal design of your application.
Storage and Transportation:
- Store the device in a dry, cool place away from direct sunlight.
- Follow the storage temperature range specified in the table to avoid degradation.
Testing:
- Before finalizing the design, perform thorough testing under various conditions to ensure the device meets the required specifications and reliability standards.

For more detailed information, refer to the datasheet provided by the manufacturer.

(For reference only)