EXO3-20.000MHZ

BUY EXO3-20.000MHZ https://www.utsource.net/itm/p/11709320.html
 

Instructions:

1. Storage and Handling:

   • Store the EXO3-20.000MHZ in a dry, cool place.
   • Handle with care to avoid mechanical shock or static discharge.

2. Soldering:

   • Use a soldering iron with a temperature not exceeding 300°C.
   • Ensure the soldering process is completed within 3 seconds per pad.
   • Allow the component to cool naturally after soldering.

3. Mounting:

   • Place the EXO3-20.000MHZ on the PCB ensuring proper alignment with the pads.
   • Apply a small amount of solder paste to the pads before placing the component.
   • Use a reflow soldering process if applicable, following the recommended temperature profile.

4. Electrical Connections:

   • Connect the supply voltage (1.8V, 2.5V, or 3.3V) to the appropriate pins.
   • Ensure the load capacitance is set to 12 pF for optimal performance.
   • Ground the GND pin securely.

5. Testing:

   • After mounting, test the oscillator to ensure it operates at the specified frequency.
   • Use an oscilloscope to verify the output waveform and frequency stability.

6. Environmental Considerations:

   • Ensure the operating environment does not exceed the temperature range of -40°C to +85°C.
   • Avoid exposing the component to excessive shock or vibration.

7. Compliance:

   • Ensure the use of the EXO3-20.000MHZ complies with all relevant industry standards and regulations.