Description
BUY MCC18-12I01 https://www.utsource.net/itm/p/1879800.html
| Parameter |
Description |
Value |
| Part Number |
Product identifier |
MCC18-12I01 |
| Type |
Device type |
Encoder |
| Supply Voltage |
Operating voltage range |
5V to 24V DC |
| Output Type |
Signal output format |
Incremental Quadrature |
| Resolution |
Number of pulses per revolution (PPR) |
12 PPR |
| Shaft Diameter |
Diameter of the shaft |
6 mm |
| Shaft Length |
Length of the shaft |
12 mm |
| Max Speed |
Maximum rotational speed |
6000 RPM |
| Electrical Life |
Expected number of cycles before failure |
10 million |
| Operating Temp. |
Temperature range for operation |
-25°C to +85°C |
| Storage Temp. |
Temperature range for storage |
-40°C to +125°C |
| Weight |
Weight of the device |
20 g |
Instructions:
- Installation: Ensure that the encoder is mounted securely on a stable surface or motor shaft. Use appropriate mounting hardware to avoid excessive vibration.
- Power Supply: Connect the power supply within the specified voltage range (5V to 24V DC). Verify polarity before applying power.
- Signal Connections: Connect the A, B, and Index (if applicable) outputs to your control system. Ensure proper termination resistance if required by your system.
- Operation: Before full operational use, test the encoder at low speeds to ensure correct installation and signal integrity.
- Maintenance: Regularly inspect the encoder for signs of wear or damage. Keep the encoder clean and free from debris.
- Storage: Store in a dry environment within the specified storage temperature range to prevent damage.
(For reference only)
More detail about Utsource Holding Company Limited
