Description
BUY S29AL016J70TFI02 https://www.utsource.net/itm/p/5077736.html
| Parameter |
Description |
| Device Type |
Serial Flash Memory |
| Manufacturer |
Samsung |
| Part Number |
S29AL016J70TFI02 |
| Memory Size |
16 Mbit (2 MByte) |
| Interface |
SPI (Serial Peripheral Interface) |
| Voltage - Supply |
VCC = 2.7V to 3.6V |
| Operating Temperature |
-40°C to +85°C |
| Package Type |
TSSOP-8 (Thin Small Outline Package) |
| Pin Count |
8 |
| Data Rate |
Up to 50 MHz |
| Endurance |
100,000 Program/Erase Cycles |
| Retention |
20 years at 25°C |
Instructions for Use
Power Supply Requirements:
- Ensure the supply voltage (VCC) is within the specified range of 2.7V to 3.6V.
SPI Interface Configuration:
- Connect the device using standard SPI connections: CS (Chip Select), SCK (Clock), MOSI (Master Out Slave In), and MISO (Master In Slave Out).
- Ensure proper configuration of the SPI settings according to the clock speed and phase/polarity requirements as detailed in the datasheet.
Initialization:
- Before performing any read or write operations, ensure the device is properly initialized by asserting the CS pin low.
Programming and Erasing:
- Follow the command sequences provided in the datasheet for programming and erasing sectors or blocks.
- Be aware of the endurance limits and avoid exceeding the maximum number of program/erase cycles.
Data Retention:
- Store the device in environments where temperature does not exceed the specified operating range to ensure data retention up to 20 years.
Handling Precautions:
- Handle the device with care to avoid damage from electrostatic discharge (ESD).
- Ensure proper mounting on the PCB following manufacturer guidelines for soldering and thermal considerations.
For detailed command codes and timing diagrams, refer to the official datasheet provided by Samsung.
(For reference only)
More detail about Utsource Holding Company Limited
