Description
BUY KRC102M-AT/P https://www.utsource.net/itm/p/5444731.html
| Parameter |
Description |
Specifications |
| Part Number |
Component Identifier |
KRC102M-AT/P |
| Type |
Device Type |
Crystal Oscillator |
| Frequency |
Operating Frequency |
10.000 MHz |
| Stability |
Frequency Stability over Temperature |
±20 ppm |
| Supply Voltage |
Operating Voltage Range |
3.0 V to 5.5 V |
| Current Consumption |
Power Supply Current (Typical) |
7 mA (at 5.0 V, 25°C) |
| Output Type |
Output Signal Type |
CMOS |
| Load Capacitance |
External Load Capacitance |
12 pF |
| Operating Temperature |
Temperature Range for Operation |
-40°C to +85°C |
| Storage Temperature |
Temperature Range for Storage |
-55°C to +125°C |
| Package |
Physical Enclosure |
Ceramic SMD |
| Dimensions |
Size |
5.0 mm x 3.2 mm x 1.6 mm |
Instructions:
- Installation: Ensure that the KRC102M-AT/P is soldered onto the PCB with correct polarity and orientation as indicated by the marking on the component.
- Power Supply: Connect the supply voltage within the specified range of 3.0 V to 5.5 V. Verify that the power supply is stable and free from excessive noise.
- Load Capacitors: Use external load capacitors of 12 pF if required by the circuit design. These should be placed as close to the oscillator as possible to minimize stray capacitance effects.
- Temperature Considerations: Operate the device within the specified temperature range (-40°C to +85°C) to ensure frequency stability and reliable performance.
- Handling Precautions: Handle the component carefully to avoid damage from electrostatic discharge (ESD). Follow standard ESD protection guidelines during assembly and handling.
- Testing: After installation, test the oscillator output using an appropriate frequency counter or oscilloscope to confirm it operates at the specified frequency and meets signal integrity requirements.
(For reference only)
More detail about Utsource Holding Company Limited
