SKIIP22NAB12I: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Min	Typ	Max	Unit	Description
Blocking Voltage	V(BR)DSS	-	1200	-	V	Maximum repetitive peak off-state drain-to-source voltage
Continuous Drain Current	ID	-	-	22	A	Continuous drain current at Tc = 25°C
Pulse Drain Current	ICM	-	88	-	A	Non-repetitive peak pulse drain current (Tc = 25°C, tp = 10 μs)
Total Gate Charge	Qg	-	63	-	nC	Total gate charge at VGS = ±15V
Input Capacitance	Ciss	-	4700	-	pF	Zero-bias input capacitance
Output Capacitance	Coss	-	950	-	pF	Zero-bias output capacitance
Reverse Transfer Capacitance	Crss	-	1050	-	pF	Zero-bias reverse transfer capacitance
On-State Resistance	RDS(on)	-	0.075	-	Ω	On-state resistance at VGS = 15V, ID = 10A
Threshold Voltage	VGS(th)	2.5	4.5	6.5	V	Gate threshold voltage

Installation:
- Ensure the device is handled with care to avoid damage from electrostatic discharge (ESD).
- Mount the component on a heatsink if continuous operation near maximum ratings is expected.
Operating Conditions:
- Do not exceed the maximum ratings listed in the table.
- Ensure adequate cooling to maintain junction temperature within specified limits.
Gate Drive Requirements:
- Use a gate driver capable of supplying sufficient current to charge and discharge the gate capacitance quickly.
- Apply gate voltages within the recommended range to ensure reliable switching performance.
Storage and Handling:
- Store in a dry environment to prevent moisture ingress.
- Handle with anti-static precautions to protect against ESD damage.
Testing:
- Perform initial testing under controlled conditions to verify proper operation.
- Monitor temperature and electrical parameters during testing to ensure safe operation.
Safety Precautions:
- Always use appropriate personal protective equipment (PPE) when handling high-voltage or high-current circuits.
- Follow all relevant safety guidelines and regulations when designing circuits with this component.

(For reference only)