Description
BUY RJP30Y2ADPP https://www.utsource.net/itm/p/8949006.html
| Parameter |
Description |
| Part Number |
RJP30Y2ADPP |
| Manufacturer |
Panasonic |
| Series |
- |
| Type |
Relay |
| Coil Voltage |
5 V DC |
| Contact Form |
SPDT (Single Pole Double Throw) |
| Contact Material |
Silver Alloy |
| Contact Rating |
10A at 250V AC |
| Insulation Resistance |
100 MΩ min. at 250V DC (at 20°C) |
| Dielectric Strength |
2500V AC for 1 minute |
| Operating Temperature |
-40°C to +85°C |
| Storage Temperature |
-40°C to +85°C |
| Mechanical Life |
10 million operations |
| Electrical Life |
100,000 operations (resistive load) |
| Weight |
6.7 g |
| Package/Case |
DIP-8 |
Instructions for Use:
Installation:
- Ensure the relay is installed in a location where it will not be exposed to excessive heat, moisture, or mechanical shock.
- Follow proper PCB layout guidelines to ensure reliable operation and prevent interference.
Coil Connection:
- Connect the coil terminals to the appropriate control circuit ensuring correct polarity if using a DC coil.
Contact Connection:
- Connect the common (COM), normally open (NO), and normally closed (NC) contacts as per your application requirements.
- Ensure that the current and voltage ratings of the contacts are not exceeded.
Operation:
- Apply the rated voltage to the coil to energize the relay, which will switch the contacts from their resting state to the actuated state.
- Remove the voltage to de-energize the relay, returning the contacts to their original state.
Maintenance:
- Regularly inspect the relay for any signs of damage or wear.
- Ensure the operating environment remains within specified limits to avoid premature failure.
Disposal:
- Dispose of the relay according to local regulations concerning electronic waste.
(For reference only)
More detail about Utsource Holding Company Limited
