UPA2811T1L-E2-AY: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating	4.5		5.5	V
Quiescent Current	IQ	VIN = VCC, no load		1.2		mA
Output Current	IOUT	Continuous, per channel		600		mA
Shutdown Current	ISD	VIN = VCC, in shutdown mode		0.5		μA
Thermal Shutdown	TSD	Typical		160		°C
Operating Temperature	TOPR	Junction	-40		125	°C
Storage Temperature	TSTG		-65		150	°C

Power Supply:
- Ensure the supply voltage (Vcc) is within the range of 4.5V to 5.5V.
- Use appropriate decoupling capacitors near the power pins to stabilize the supply voltage.
Installation:
- Mount the device on a PCB with adequate thermal management if operating at high output currents or temperatures.
- Ensure proper clearance and avoid placing heat-generating components nearby.
Operation:
- Do not exceed the maximum output current rating of 600mA per channel continuously.
- Utilize the shutdown feature by pulling the SD pin low when not in use to minimize power consumption.
Thermal Considerations:
- Monitor the junction temperature to ensure it does not exceed 125°C during operation.
- The device will automatically enter thermal shutdown if the temperature exceeds approximately 160°C.
Storage:
- Store the device in an environment where the temperature does not drop below -65°C or rise above 150°C.
Handling:
- Follow standard ESD (Electrostatic Discharge) precautions when handling the component to prevent damage.
Application Notes:
- Refer to the datasheet for detailed application circuits and additional guidelines specific to your design requirements.

(For reference only)