APT4016BVR: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating	1.8		5.5	V
Input Voltage Range	VIN		-0.3		VDD+0.3	V
Output Voltage Range	VOUT		0		VDD-0.3	V
Continuous Current	ICONT			1.6	2.0	A
Peak Current Limit	ILIM			2.5	3.0	A
Quiescent Current	IQ	No load		70		μA
Shutdown Current	ISD	VEN = 0V		0.1		μA
Output Voltage Accuracy	ΔVOUT	VREF=1.22V, RL=1kΩ	-2%		+2%	%
Power Dissipation	PD	TA=25°C			1000	mW
Junction Temperature	TJ	Operating	-40		125	°C

Supply Voltage (VDD):
- Ensure the supply voltage is within the range of 1.8V to 5.5V to avoid damage or improper operation.
Input Voltage (VIN):
- The input voltage should not exceed VDD + 0.3V and should not be less than -0.3V relative to ground.
Output Voltage (VOUT):
- Set the output voltage by adjusting external resistors according to the datasheet formula. Ensure it stays within the range from 0V to VDD - 0.3V.
Continuous Current (ICONT):
- The device can handle a continuous current between 1.6A and 2.0A under typical conditions.
Peak Current Limit (ILIM):
- The peak current limit is typically between 2.5A and 3.0A to protect against short circuits.
Quiescent Current (IQ):
- When there is no load, the quiescent current is approximately 70μA.
Shutdown Current (ISD):
- In shutdown mode (VEN pin at 0V), the current consumption drops to about 0.1μA.
Output Voltage Accuracy (ΔVOUT):
- For accurate output voltage, ensure that the reference voltage (VREF) is set correctly, with an accuracy tolerance of ±2%.
Power Dissipation (PD):
- Do not exceed 1000mW power dissipation to prevent overheating.
Junction Temperature (TJ):
- Operate the device within the temperature range of -40°C to 125°C to maintain reliability.

For detailed design considerations and specific application notes, refer to the full datasheet provided by the manufacturer.

(For reference only)