Description
BUY RECTIFIER BRIDGE GBJ1510 15A 1000V DIP4 https://www.utsource.net/itm/p/11612007.html
| Parameter |
Value |
Unit |
| Maximum Repetitive Peak Reverse Voltage (VRRM) |
1000 |
V |
| Maximum Average Rectified Output Current (IO) |
15 |
A |
| Maximum RMS Current (IRMS) |
12.7 |
A |
| Peak Surge Current (IFSM) |
300 |
A |
| Junction Temperature Range (TJ) |
-55 to +150 |
°C |
| Storage Temperature Range (TS) |
-55 to +150 |
°C |
| Package Type |
DIP4 |
|
Instructions for Use:
Installation:
- Ensure that the rectifier bridge is mounted on a suitable heat sink if operating near maximum current ratings to maintain optimal performance and longevity.
- Insert the component into the PCB according to the correct pin configuration, ensuring that no pins are bent or misaligned.
Electrical Connections:
- Connect the AC input to the two diagonal terminals marked as "~".
- Connect the positive output terminal (marked "+") to the positive rail of your circuit.
- Connect the negative output terminal (marked "-") to the negative rail or ground of your circuit.
Handling Precautions:
- Handle the rectifier bridge with care to avoid damage to the leads or body.
- Avoid exposing the component to excessive moisture or corrosive environments.
- Follow standard ESD (Electrostatic Discharge) precautions when handling the component to prevent damage.
Operating Conditions:
- Do not exceed the maximum voltage and current ratings specified in the table.
- Ensure adequate ventilation or cooling if operating at high currents or in high ambient temperatures to prevent overheating.
Storage:
- Store in a dry, cool place away from direct sunlight and sources of heat.
- Keep components in original packaging until ready for use to protect against static damage.
(For reference only)
More detail about Utsource Holding Company Limited
