INA132U: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Test Conditions	Min	Typ	Max	Unit
Supply Voltage	V_S		2.7		36	V
Input Voltage Range	V_IN		-0.1		V_S+0.1	V
Quiescent Current	I_Q	V_S = 5V		60		μA
Input Bias Current	I_B	V_S = 5V, V_IN = 0V		1		nA
CMRR		f = 60Hz	98			dB
PSRR		f = 60Hz	94			dB
Bandwidth		G = 1, V_O = 2Vpp		1.2		MHz
Output Voltage Swing	V_OUT	V_S = 5V, RL = 10kΩ	0.2		4.8	V

Power Supply Connection:
- Connect the supply voltage (V_S) between 2.7V and 36V to the V+ pin and ground (GND) to the V- pin.
Input Signal Application:
- Apply the differential input signal across the IN+ and IN- pins. Ensure that the input voltages remain within the specified input voltage range relative to the supply voltage.
Output Configuration:
- The output is single-ended and should be connected to the load or next stage of the circuit. Ensure the load resistance allows the output voltage swing to operate within the specified limits.
Biasing and Decoupling:
- Use appropriate decoupling capacitors close to the power supply pins to minimize noise and transient effects. A typical value is 0.1μF.
Operating Temperature:
- Ensure the device operates within its specified temperature range (-40°C to +125°C) to maintain performance parameters.
Handling Precautions:
- Handle with care to avoid damage from electrostatic discharge (ESD). Follow standard ESD precautions when handling the device.
Testing and Calibration:
- For accurate performance, test the device under conditions similar to those in the application environment. Calibration may be necessary depending on the precision required.
Layout Considerations:
- Keep input leads short to minimize noise pickup. Use a star grounding technique if multiple grounds are involved to prevent ground loops.

This table and set of instructions provide essential information for effectively using the INA132U instrumentation amplifier.

(For reference only)