INA114AU: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	V_CC		±5		±18	V
Input Offset Voltage	V_IO	Initial (25°C)	-0.3	0	0.3	mV
Input Bias Current	I_B	@ V_CC=±15V	20		400	nA
Common-Mode Rejection Ratio	CMRR	@ f=60Hz, G=1000V/V	98	110		dB
Power Supply Rejection Ratio	PSRR	@ f=60Hz	90	100		dB
Slew Rate	SR		0.2		0.4	V/μs
Bandwidth	BW	@ G=1000V/V		10		Hz
Output Voltage Swing	V_O(S)	No Load	±12		±13.5	V

Power Supply Connections:
- Connect the positive supply voltage to pin 6 (V+) and the negative supply voltage to pin 4 (V-). Ensure that the supply voltage range is within ±5V to ±18V.
Input Signal Connections:
- Connect the input signal to the non-inverting (+IN) and inverting (-IN) inputs on pins 2 and 3 respectively. Be mindful of the common-mode input voltage range relative to the supply voltages.
Output Connections:
- The output can be taken from pin 7 (OUT). Note the output voltage swing capabilities when designing the load circuitry.
Biasing and Decoupling:
- Use appropriate decoupling capacitors close to the power supply pins to minimize noise and ensure stable operation. Typically, a 0.1 μF capacitor is recommended.
Handling Precautions:
- The device is sensitive to electrostatic discharge (ESD); handle with care and follow proper ESD precautions.
Operating Temperature Range:
- The specified operating temperature range for the INA114AU is from -40°C to +85°C. Ensure that the ambient temperature does not exceed these limits during operation.
Mounting and Storage:
- Store the device in a dry environment and mount it according to manufacturer guidelines to avoid mechanical stress which could affect performance.

For detailed application notes and further information, refer to the full datasheet provided by the manufacturer.

(For reference only)