SIL9033CTU: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	2.7		5.5	V	Operating voltage range
Supply Current	IDD		10		mA	Typical supply current
Output Voltage Range	VO	0		VDD	V	Output voltage swing
Bandwidth	BW		8		MHz	Small signal bandwidth
Slew Rate	SR		3		V/μs	Slew rate
Input Offset Voltage	VOS	-1		1	mV	Input offset voltage at 25°C
Common Mode Rejection	CMRR		80		dB	Common mode rejection ratio at DC
Power Down Mode Current	ISD		1		μA	Supply current in shutdown mode
Operating Temperature	TOPR	-40		85	°C	Operating temperature range

Power Supply Connection:
- Connect the VDD pin to a power supply within the range of 2.7V to 5.5V.
- Ensure a stable power supply to prevent operational issues.
Grounding:
- Connect the GND pin to a common ground point to ensure proper operation and noise reduction.
Input Signal:
- Apply the input signal to the IN+ and IN- pins. Ensure the input voltage does not exceed the supply voltage (VDD).
Output Configuration:
- The output can be taken from the OUT pin. Ensure that the load connected to the output does not draw excessive current.
Power Down Mode:
- To enter power-down mode, set the SHDN pin to a logic low. This reduces the supply current to approximately 1μA.
Temperature Considerations:
- Operate the device within the temperature range of -40°C to +85°C to ensure reliable performance.
Layout Recommendations:
- Place decoupling capacitors close to the VDD and GND pins to minimize noise and improve stability.
- Use short and direct traces for critical signals to reduce parasitic effects.
Handling Precautions:
- Handle the device with care to avoid electrostatic discharge (ESD) damage. Use appropriate ESD protection measures.

Note: Always refer to the latest datasheet provided by the manufacturer for detailed specifications and application notes.

(For reference only)