Description
BUY AM29LV160DT-70FI https://www.utsource.net/itm/p/12606199.html
| Parameter |
Description |
Value |
| Device Type |
Flash Memory |
16M-Bit |
| Organization |
x8 / x16 |
2M x 8, 1M x 16 |
| Voltage (Vcc) |
Supply Voltage |
3.0 V to 3.6 V |
| Access Time |
Standard Access Time |
70 ns |
| Package Type |
Packaging |
TSOP-I, TSOP-II |
| Temperature Range |
Operating Temperature |
-40°C to +85°C |
| Interface |
Communication Interface |
SPI |
| Write Cycle Time |
Time required for a write cycle |
4 ms |
| Block Erase Time |
Time required for block erasure |
30 ms (typical) |
| Chip Erase Time |
Time required for chip erasure |
60 s (maximum) |
| Endurance |
Number of write/erase cycles |
100,000 cycles |
| Data Retention |
Period data is retained without power |
10 years |
Instructions:
Power Supply:
- Ensure the supply voltage (Vcc) is within the specified range of 3.0 V to 3.6 V.
Initialization:
- Before performing any read/write operations, initialize the device according to the datasheet guidelines.
Read Operations:
- Use standard read commands compatible with the interface type (SPI).
Write Operations:
- Perform a write enable command before initiating any write or erase operation.
- Wait for the write cycle time (4 ms) to complete before starting a new operation.
Erase Operations:
- For block erasure, use the block erase command and wait for the typical time of 30 ms.
- For full chip erasure, use the chip erase command and allow up to 60 seconds for completion.
Operating Temperature:
- Ensure that the operating temperature remains within -40°C to +85°C to maintain reliability.
Handling Precautions:
- Handle the device with care to avoid electrostatic discharge (ESD) damage.
- Follow all storage and handling instructions provided in the datasheet.
(For reference only)
More detail about Utsource Holding Company Limited
