Description
BUY EP2-N6 https://www.utsource.net/itm/p/12606278.html
| Parameter |
Description |
| Part Number |
EP2-N6 |
| Function |
High-performance digital signal processing unit |
| Operating Voltage |
3.3V ± 5% |
| Input Voltage |
2.7V to 3.6V |
| Digital I/O Pins |
40 |
| Analog Input Pins |
12 |
| Flash Memory |
512 KB |
| SRAM |
96 KB |
| Clock Speed |
Up to 80 MHz |
| Operating Temperature |
-40°C to +85°C |
| Storage Temperature |
-65°C to +150°C |
| Package Type |
QFP (Quad Flat Package) |
| Dimensions |
14 mm x 14 mm |
Instructions for Use:
- Power Supply: Ensure the power supply is within the specified operating voltage range of 2.7V to 3.6V.
- Pin Configuration: Refer to the datasheet for detailed pin configurations and functions.
- Programming: Use a compatible programming interface to load firmware onto the flash memory.
- Clock Setup: Configure the clock source and speed as required by your application, ensuring it does not exceed 80 MHz.
- Environmental Conditions: Operate within the specified temperature ranges to ensure reliability and longevity.
- Installation: Secure the component on the PCB using appropriate soldering techniques, ensuring all pins are correctly aligned and soldered.
- Testing: After installation, perform initial tests to verify functionality and proper operation under expected conditions.
(For reference only)
More detail about Utsource Holding Company Limited
