Description
BUY BTA12-800 https://www.utsource.net/itm/p/12606764.html
| Parameter |
Symbol |
Min |
Typ |
Max |
Unit |
Description |
| Rated Off-state Voltage |
VDRM |
- |
800 |
- |
V |
Maximum repetitive peak off-state voltage |
| Rated RMS On-state Current |
IT(RMS) |
- |
12 |
- |
A |
Maximum RMS on-state current |
| Non-repetitive Peak On-state Current |
I TM |
- |
150 |
- |
A |
Maximum non-repetitive peak on-state current |
| Turn-on Sensitivity |
IT(tr) |
35 |
65 |
- |
mA |
Gate trigger current |
| Holding Current |
IH |
5 |
50 |
- |
mA |
Minimum current to maintain on-state condition |
| Power Dissipation |
PD |
- |
- |
150 |
W |
Maximum power dissipation |
Instructions for BTA12-800:
Mounting and Handling:
- Ensure proper heat sinking if operating near maximum current ratings.
- Handle with care to avoid damage to the sensitive gate terminal.
Circuit Design:
- Use a suitable gate resistor to limit gate current and protect the device from transient spikes.
- Ensure that the circuit design accommodates the maximum rated off-state voltage and does not exceed the non-repetitive peak on-state current limits.
Operating Conditions:
- Keep the junction temperature within safe limits by ensuring adequate cooling, especially at high current levels.
- Avoid exceeding the holding current threshold to prevent unintended turn-off during operation.
Testing and Troubleshooting:
- Verify correct installation and connections before applying power.
- Monitor device temperature and performance parameters regularly to ensure reliable operation.
Storage:
- Store in a dry, cool environment away from direct sunlight and sources of electromagnetic interference.
This table and set of instructions provide essential information for safely using and integrating the BTA12-800 triac into electronic circuits.
(For reference only)
More detail about Utsource Holding Company Limited
