Description
BUY SRD-03VDC-SL-C https://www.utsource.net/itm/p/12607079.html
| Parameter |
Description |
Value |
| Type |
Relay Type |
SPDT |
| Model |
Model Number |
SRD-03VDC-SL-C |
| Coil Voltage |
Operating Voltage of Coil |
3 VDC |
| Coil Current |
Operating Current of Coil |
94 mA |
| Contact Form |
Contact Configuration |
SPDT (Single Pole Double Throw) |
| Contact Rating |
Maximum Switching Capacity |
10A, 250VAC / 30VDC |
| Insulation Resistance |
Between Terminals |
100 MΩ min. |
| Dielectric Strength |
Between Terminals |
1500 VAC for 1 minute |
| Mechanical Life |
Operation Cycles |
10 million operations |
| Electrical Life |
Operation Cycles with Load |
100,000 operations |
| Operating Temperature |
Temperature Range |
-40°C to +85°C |
| Storage Temperature |
Storage Temperature Range |
-40°C to +85°C |
| Weight |
Weight |
6 g |
| Dimensions |
Dimensions (L x W x H) |
17.5 x 12.2 x 11.1 mm |
Instructions:
Installation:
- Ensure the relay is mounted on a flat surface.
- Use appropriate screws or clips to secure the relay in place.
Wiring:
- Connect the coil terminals to the control circuit using wires suitable for the current and voltage ratings.
- Connect the common (COM), normally open (NO), and normally closed (NC) contacts to the load circuit according to your application needs.
Power Supply:
- Apply the specified coil voltage (3 VDC) to activate the relay.
- Ensure the power supply is stable and within the rated voltage range to avoid damage.
Operation:
- The relay can switch loads up to its contact rating (10A, 250VAC / 30VDC).
- Avoid exceeding the maximum switching capacity to prevent premature failure.
Maintenance:
- Regularly inspect connections for corrosion or loose fittings.
- Ensure the operating environment remains within the specified temperature range.
Safety:
- Do not exceed the electrical ratings to prevent fire or electric shock.
- Handle the relay with care to avoid physical damage.
(For reference only)
More detail about Utsource Holding Company Limited
