Description
BUY G2R-2-24V https://www.utsource.net/itm/p/12607087.html
| Parameter |
Description |
Value |
| Model |
Model Number |
G2R-2-24V |
| Type |
Relay Type |
SPDT (Single Pole Double Throw) |
| Voltage |
Operating Voltage |
24V DC |
| Coil Power |
Coil Power Consumption |
1.2W |
| Current |
Coil Current |
50mA |
| Contact Form |
Contact Configuration |
1NO+1NC |
| Contact Rating |
Contact Load (Resistive) |
10A, 250VAC / 30VDC |
| Insulation Resistance |
Insulation Resistance Between Contacts |
100MΩ min at 500VDC |
| Dielectric Strength |
Dielectric Strength Between Contacts |
2500VAC for 1 minute |
| Operating Temperature |
Operating Temperature Range |
-40°C to +85°C |
| Storage Temperature |
Storage Temperature Range |
-40°C to +125°C |
| Humidity |
Relative Humidity |
5% to 95% RH non-condensing |
| Dimensions |
Dimensions (L x W x H) |
17.5mm x 12.2mm x 12.2mm |
| Weight |
Weight |
5g |
Instructions:
- Installation: Ensure the relay is installed in a well-ventilated area and away from direct heat sources. Secure the relay using the provided mounting hardware.
- Wiring: Connect the coil terminals to a 24V DC power supply. Connect the load between the NO (Normally Open) and COM (Common) terminals. For fail-safe operation, connect the NC (Normally Closed) terminal as required.
- Operation: Apply voltage to the coil terminals to energize the relay. This will switch the contacts from the NC position to the NO position. Removing the voltage will return the contacts to their default state.
- Maintenance: Regularly inspect connections for corrosion or damage. Ensure the operating environment remains within specified temperature and humidity limits.
- Safety: Do not exceed the rated voltage or current. Always disconnect power before performing any maintenance or wiring changes.
(For reference only)
More detail about Utsource Holding Company Limited
