PALCE20V8H-25PC: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Description	Value
Package Type	Package style	PLCC-20
Operating Voltage (Vcc)	Supply voltage range	3.3V to 5.5V
Logic Family	Type of logic family	CMOS
Configuration Memory	Non-volatile memory for configuration storage	8K x 16 bits
Macrocells	Number of macrocells available for design	20
I/O Pins	Number of input/output pins	16
Max Clock Frequency	Maximum frequency the device can operate at	25 MHz
Power Consumption	Typical power consumption	100 mW
Operating Temperature	Range of temperature for operation	-40°C to +85°C
Programming Method	Method used to program the device	ISP (In-System Programmable)
Erase Method	Method used to erase the device	Electrical

Power Supply Connection:
- Connect Vcc to a supply voltage between 3.3V and 5.5V.
- Ensure GND is properly connected to ground.
Programming:
- Use an appropriate programmer that supports ISP.
- Follow the programming software instructions to load your design into the device’s non-volatile memory.
Configuration:
- Before applying power, ensure all I/O pins are set according to the design requirements.
- The device will automatically configure itself from the stored configuration upon power-up.
Operation:
- Once powered and configured, the device operates based on the programmed logic.
- Monitor power consumption and temperature to ensure they remain within specified limits.
Erasing:
- To erase the device, use the electrical erase method supported by the programming hardware.
Handling:
- Handle with care to avoid damage from electrostatic discharge (ESD).
- Store in anti-static packaging when not in use.

(For reference only)