Description
BUY DK1A-24V-F https://www.utsource.net/itm/p/12607565.html
| Parameter |
Description |
| Model |
DK1A-24V-F |
| Type |
Relay Module |
| Supply Voltage |
24V DC |
| Coil Resistance |
1200Ω |
| Contact Form |
SPDT (Single Pole Double Throw) |
| Contact Rating |
10A, 250VAC / 30VDC |
| Insulation Voltage |
2500VAC for 1 minute |
| Operating Temperature |
-40°C to +85°C |
| Storage Temperature |
-40°C to +85°C |
| Mounting |
PCB mount |
| Dimensions |
37mm x 22mm x 26mm |
Instructions:
- Power Supply: Connect the relay module to a stable 24V DC power supply.
- Installation: Ensure the relay is mounted on a suitable PCB with appropriate clearance.
- Wiring Connections:
- Connect the coil terminals to the control circuit.
- Connect the common (COM), normally open (NO), and normally closed (NC) contacts to the load circuit as required.
- Operation: When the control signal is applied to the coil, the relay will switch from the NC to the NO contact.
- Maintenance: Regularly check connections and ensure the operating environment does not exceed specified temperature limits.
- Safety: Handle with care to avoid damage to the component or electrical hazards.
(For reference only)
More detail about Utsource Holding Company Limited
