am2d-0518sz: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Description	Value
Part Number	Full part identifier	AM2D-0518SZ
Type	Device type	Reed Relay
Coil Voltage	Voltage required to activate the relay coil	5V DC
Coil Current	Current drawn by the coil when activated	35mA
Contact Form	Configuration of relay contacts	SPDT
Contact Rating	Maximum current and voltage that contacts can handle	1A, 240V AC / 28V DC
Insulation Resistance	Resistance between isolated points	>100MΩ at 500V DC
Dielectric Strength	Voltage withstand capability	1500V AC for 1 minute
Operating Temperature	Temperature range for reliable operation	-40°C to +85°C
Storage Temperature	Temperature range for storage	-40°C to +125°C
Weight	Mass of the component	2.5g

Installation: Ensure the relay is installed in a location where it will not be subjected to excessive mechanical shock or vibration.
Wiring: Connect the coil terminals to the specified coil voltage (5V DC). Connect the common contact (COM) to one side of the load circuit and either normally open (NO) or normally closed (NC) contacts as required.
Handling: Handle with care to avoid damage to the reed switch inside the relay.
Testing: Before installing into final equipment, test the relay under actual operating conditions to ensure correct operation.
Maintenance: No regular maintenance is required; however, inspect periodically for signs of wear or damage.
Storage: Store in a dry place within the specified storage temperature range to prevent damage.
Compliance: Ensure that the application complies with all relevant safety and regulatory standards.

(For reference only)