NJM7815A: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Output Voltage	Vout	No load	-	15	-	V
Line Regulation		Input voltage change	0.004	-	0.01	%/V
Load Regulation		Load current from 0 to 1A	0.01	-	0.2	%
Dropout Voltage	Vdo	Iout = 1A	-	1.7	-	V
Quiescent Current	IQ	Typical operating condition	-	8	-	mA
Ripple Rejection		1kHz	60	-	80	dB
Thermal Shutdown	TSD	Operating junction temperature	-	170	-	°C
Short-Circuit Current	ISC	Vout shorted	-	2	-	A

Installation and Mounting:
- Ensure proper heat dissipation by mounting the NJM7815A on a heatsink if it is expected to dissipate significant power.
- Follow standard PCB layout practices to minimize noise and improve stability.
Input Capacitor:
- It is recommended to place a capacitor (typically 0.33 μF) at the input to stabilize the regulator against input transients.
Output Capacitor:
- An output capacitor (typically 0.1 μF) should be placed close to the output terminal to ensure stability and reduce output noise.
Operating Temperature Range:
- The device operates reliably within the temperature range of -40°C to +125°C.
Handling Short Circuits:
- The NJM7815A includes internal short-circuit protection, but external fuses or current-limiting resistors may be necessary depending on the application.
Thermal Protection:
- The regulator features thermal shutdown to protect against overheating. Ensure adequate cooling for continuous operation under heavy loads.
Voltage Regulation:
- The NJM7815A provides a fixed output voltage of 15V. Verify that this meets your circuit requirements before installation.
Load Regulation:
- Keep in mind the load regulation when designing circuits where load current varies significantly, as this can affect output voltage stability.
Line Regulation:
- Consider the line regulation if the input voltage fluctuates, as this can impact the stability of the output voltage.

(For reference only)