Description
BUY VO3120 https://www.utsource.net/itm/p/12607992.html
| Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Conditions |
| Supply Voltage |
VDD |
2.7 |
- |
5.5 |
V |
|
| Output High Voltage |
VOH |
- |
VDD-0.1 |
VDD |
V |
IO = -1mA |
| Output Low Voltage |
VOL |
0 |
0.1 |
- |
V |
IO = 1mA |
| Input Leakage Current |
IIL |
- |
1 |
5 |
μA |
VI = VIL, VDD = 5V |
| Propagation Delay Time |
tPLH |
4 |
6 |
8 |
ns |
VDD = 5V, TA = 25°C |
| Propagation Delay Time |
tPHL |
4 |
6 |
8 |
ns |
VDD = 5V, TA = 25°C |
Instructions for Use:
- Power Supply: Ensure the supply voltage (VDD) is within the range of 2.7V to 5.5V.
- Output Voltage Levels:
- For output high (VOH), the voltage should be close to the supply voltage minus a small drop (typically around 0.1V).
- For output low (VOL), the voltage should ideally be near 0V or up to 0.1V.
- Input Handling: Be cautious with input leakage current (IIL), which can vary from 1μA to 5μA under typical conditions.
- Timing Considerations:
- The propagation delay times (tPLH and tPHL) are critical for timing-sensitive applications. Both delays are typically around 6ns but can range from 4ns to 8ns depending on operating conditions.
- Operating Temperature: While not explicitly stated, ensure the device operates within a temperature range that supports these parameters, typically room temperature unless specified otherwise.
For more detailed specifications and advanced usage, refer to the official datasheet provided by the manufacturer.
(For reference only)
More detail about Utsource Holding Company Limited
