SN74AUC16245DGVRG4: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Description	Value
Part Number	Device identifier	SN74AUC16245DGVRG4
Function	8-Bit Noninverting Bus Buffer with 3-State Outputs
Supply Voltage (VCC)	Operating voltage range	1.65 V to 3.63 V
I/O Voltage (VIH, VIL)	Input high/low voltage levels	VIH: 0.7 × VCC, VIL: 0.3 × VCC
Output Current (IOH, IOL)	Output high/low current capability	IOH: -12 mA, IOL: 24 mA
Propagation Delay (tpd)	Time delay from input change to output change	3.9 ns (typical at VCC = 3.3V)
Operating Temperature	Range of ambient temperatures where the device can operate reliably	-40°C to +85°C
Storage Temperature	Temperature range for storing the device without damage	-65°C to +150°C
Package Type	Physical package of the component	TSSOP (Thin Shrink Small Outline Package)
Pins	Number of pins	24
Manufacturer	Original equipment manufacturer	Texas Instruments

Power Supply Connection: Connect the VCC pin to a power supply within the specified voltage range and GND to ground.
Signal Inputs: Apply input signals to the A1-A8 pins. Ensure signal levels do not exceed VIH or go below VIL.
Direction Control: Use the DIR pin to control the direction of data flow. High on DIR enables A to B transfer; Low enables B to A transfer.
Enable Control: The OE pin controls the output enable function. When active (logic level dependent on configuration), it allows the outputs to follow the inputs. When inactive, outputs are in high-impedance state.
Handling Static Electricity: Handle with care as this device is sensitive to static electricity. Follow proper ESD handling procedures.
Mounting and Soldering: Follow the recommended soldering profile and mounting guidelines provided by the manufacturer to avoid damage during assembly.

(For reference only)