B17Z2016B

BUY B17Z2016B https://www.utsource.net/itm/p/12608222.html

Instructions for B17Z2016B:

1. Power Supply Connection:

   • Connect the input voltage (V_IN) between 2.7V and 5.5V to the VIN pin.
   • Ensure a stable power supply to avoid fluctuations that can affect performance.

2. Output Configuration:

   • The output voltage (V_OUT) is fixed at 3.3V. Connect the load to the VOUT pin.

3. Ground Connection:

   • Ensure a proper ground connection for both input and output circuits to maintain stability and performance.

4. Capacitor Requirements:

   • Use a 1μF ceramic capacitor from VIN to GND close to the device for input filtering.
   • Place a 1μF ceramic capacitor from VOUT to GND for output stability.

5. Thermal Considerations:

   • Operate within the temperature range of -40°C to +85°C.
   • Ensure adequate heat dissipation if operating at higher currents or temperatures.

6. Load Regulation:

   • The device maintains output voltage within ±0.5% as the load current changes from 1mA to 100mA.

7. Line Regulation:

   • The output voltage variation is within ±0.2% as the input voltage changes from 2.7V to 5.5V.

8. Ripple Rejection:

   • Provides 60dB ripple rejection at 120Hz, ensuring clean output voltage.

9. Quiescent Current:

   • The device consumes only 1.0μA quiescent current when operating at 5V input voltage, making it suitable for low-power applications.

10. Dropout Voltage:

    • The dropout voltage is as low as 0.3V at an output current of 100mA, allowing operation even with small differences between input and output voltages.