AP60SL600AH: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VIN	2.7	-	5.5	V	Operating input voltage range
Output Voltage	VOUT	-	3.3	-	V	Fixed output voltage
Output Current	IOUT	-	-	600	mA	Maximum continuous output current
Quiescent Current	IQ	-	18	-	μA	Supply current in regulation
Shutdown Current	ISD	-	0.1	-	μA	Supply current in shutdown mode
Dropout Voltage	VDROPOUT	-	200	-	mV	Typical dropout voltage at IOUT = 300mA
PSRR @ 1kHz	PSRR	-	60	-	dB	Power supply rejection ratio
Line Regulation	LREG	-	0.1	-	%	Line regulation over line range
Load Regulation	LDR	-	0.5	-	%	Load regulation from 0 to IOUT(max)

Input Voltage Connection:
- Connect the input voltage (VIN) between 2.7V and 5.5V to the IN pin.
Output Voltage Configuration:
- The device has a fixed output voltage of 3.3V. No external resistors are required for setting the output voltage.
Ground Connection:
- Ensure a solid connection to ground for all pins requiring it, especially for stable operation.
Capacitors:
- Place a 1μF ceramic capacitor close to the IN pin for input filtering.
- Place a 1μF ceramic capacitor close to the OUT pin for output stability.
Shutdown Feature:
- To put the device into shutdown mode, pull the SHDN pin low. This reduces the supply current to approximately 0.1μA.
Thermal Considerations:
- Ensure adequate heat dissipation if operating near maximum output current to prevent overheating.
PCB Layout Recommendations:
- Keep traces short and wide to minimize inductance and resistance.
- Ensure good thermal vias under the IC to aid in heat dissipation.
Operating Temperature Range:
- The device is specified to operate within a temperature range of -40°C to +85°C.
Storage and Handling:
- Store in a dry environment and handle with care to avoid damage from electrostatic discharge (ESD).

(For reference only)