Description
BUY PS2018 https://www.utsource.net/itm/p/12608370.html
| Parameter |
Description |
| Part Number |
PS2018 |
| Type |
Power Supply Module |
| Input Voltage |
9V - 36V DC |
| Output Voltage |
Adjustable, typically 3.3V, 5V, 12V |
| Output Current |
Up to 3A (depending on the output voltage setting) |
| Efficiency |
Up to 92% |
| Operating Temp |
-40°C to +85°C |
| Protection |
Overcurrent, Overvoltage, Short Circuit |
| Dimensions |
50mm x 30mm x 15mm |
| Weight |
50g |
Instructions:
Installation:
- Ensure the input voltage matches the specifications.
- Connect the input wires to the power source and the output wires to your device.
Adjusting Output Voltage:
- Use a multimeter to measure the output voltage.
- Adjust the potentiometer on the module until the desired output voltage is achieved.
Safety Precautions:
- Do not exceed the maximum input voltage to avoid damaging the module.
- Ensure proper ventilation to prevent overheating.
- Keep away from water and moisture to avoid short circuits.
Maintenance:
- Regularly check connections for corrosion or looseness.
- Clean dust from the module using a soft brush.
Troubleshooting:
- If the output voltage is unstable, check all connections and ensure the input voltage is stable.
- In case of no output, verify that the input voltage is within the specified range and that there are no shorts in the wiring.
(For reference only)
More detail about Utsource Holding Company Limited
