Description
BUY LA1193M https://www.utsource.net/itm/p/12608434.html
| Parameter |
Symbol |
Conditions |
Min |
Typ |
Max |
Unit |
| Supply Voltage |
Vcc |
Operating |
4.5 |
|
5.5 |
V |
| Standby Current |
ISB |
Vcc = 5V |
|
1 |
|
μA |
| Operating Current |
IOP |
Vcc = 5V, f = 3kHz |
20 |
|
|
mA |
| Output Voltage |
Vout |
No Load |
0 |
|
5 |
V |
| Frequency Response |
|
|
20 |
|
20k |
Hz |
| Rise Time |
Tr |
Vcc = 5V |
|
2 |
|
μs |
| Fall Time |
Tf |
Vcc = 5V |
|
2 |
|
μs |
Instructions for LA1193M:
- Power Supply: Connect the supply voltage (Vcc) between 4.5V and 5.5V to the Vcc pin. Ensure a stable power supply to avoid malfunction.
- Ground Connection: Connect the ground (GND) pin to the system ground.
- Input Signal: Apply the input signal to the designated input pin. The frequency response is optimal between 20Hz and 20kHz.
- Output Handling: The output voltage can range from 0V to 5V under no-load conditions. Ensure that any load connected does not exceed the operating current limits.
- Current Considerations: Keep standby current below 1μA and ensure that the operating current does not exceed 20mA at Vcc = 5V and a frequency of 3kHz.
- Timing Parameters: Note the rise and fall times are approximately 2μs under standard operating conditions.
- Protection Circuits: Incorporate necessary protection circuits (like decoupling capacitors) near the power pins to ensure stable operation.
- Operating Environment: Ensure the device operates within recommended temperature ranges to prevent damage or performance degradation.
(For reference only)
More detail about Utsource Holding Company Limited
