Description
BUY G6B-1114P-US-24VDC https://www.utsource.net/itm/p/12608473.html
| Parameter |
Value |
| Part Number |
G6B-1114P-US-24VDC |
| Type |
Relay |
| Coil Voltage |
24 VDC |
| Coil Power Consumption |
0.75 W |
| Coil Current |
31.25 mA |
| Contact Form |
SPDT (Single Pole Double Throw) |
| Contact Material |
Silver alloy |
| Contact Rating |
10 A, 250 VAC |
| Insulation Resistance |
100 MΩ or more (500 VDC) |
| Dielectric Strength |
AC 2000 Vrms for 1 minute |
| Operating Temperature |
-40 to +85 °C |
| Storage Temperature |
-40 to +85 °C |
| Humidity |
95% RH at 40°C (no condensation) |
| Terminal Type |
Plug-in |
| Dimensions |
17.5 x 12.5 x 12.5 mm |
| Weight |
Approx. 5 g |
Instructions:
- Installation: Ensure the relay is installed in a location that meets the operating temperature and humidity requirements.
- Power Supply: Connect the coil terminals to a 24 VDC power supply. Verify the polarity as incorrect connection can damage the component.
- Load Connection: Connect the load to the contact terminals ensuring the current and voltage ratings are not exceeded.
- Inspection: Before use, check all connections for correctness and tightness. Perform an insulation resistance test if necessary.
- Maintenance: Regularly inspect the relay for signs of wear or damage. Keep the relay clean and free from dust and debris.
- Handling: Handle with care to avoid mechanical shock which could affect performance.
- Disposal: Dispose of the relay according to local regulations for electronic components.
(For reference only)
More detail about Utsource Holding Company Limited
