Description
BUY G2R-2-12VDC https://www.utsource.net/itm/p/12608480.html
| Parameter |
Value |
Description |
| Part Number |
G2R-2-12VDC |
Relay model identifier |
| Voltage |
12V DC |
Coil operating voltage |
| Coil Resistance |
100 Ohms |
Resistance of the relay coil |
| Contact Form |
SPDT |
Single Pole Double Throw |
| Contact Rating |
10A, 250V AC |
Maximum current and voltage for contacts |
| Operating Temp. |
-40°C to 85°C |
Temperature range for reliable operation |
| Insulation Resistance |
>100MΩ |
Electrical resistance between insulated parts |
| Dielectric Strength |
1kV AC |
Voltage withstand capability |
Instructions:
- Installation: Ensure the relay is mounted on a suitable surface that can dissipate heat effectively. Use the mounting holes provided for secure attachment.
- Wiring: Connect the control circuit to the coil terminals ensuring the polarity is correct for DC operation. Wire the load to the common (COM) and normally open (NO) or normally closed (NC) contacts as required.
- Power Supply: Provide a stable 12V DC power supply to the coil. Verify all connections are secure before applying power.
- Testing: After installation, test the relay by energizing the coil and verifying the contact changeover. Listen for a click sound indicating the relay is operating.
- Maintenance: Periodically inspect the relay for any signs of wear or damage. Clean the relay using compressed air; avoid using liquids which can cause damage.
- Storage: If not in use, store the relay in a dry environment away from direct sunlight and sources of extreme temperature.
(For reference only)
More detail about Utsource Holding Company Limited
