Description
BUY G5CA-1A-E-24VDC https://www.utsource.net/itm/p/12608666.html
| Parameter |
Description |
| Part Number |
G5CA-1A-E-24VDC |
| Type |
Relay |
| Coil Voltage |
24 VDC |
| Coil Current |
80 mA (max) |
| Contact Form |
SPDT (Single Pole Double Throw) |
| Contact Rating |
10 A, 250 VAC (resistive load) |
| Insulation Voltage |
2500 Vrms (coil to contact) |
| Operating Temperature |
-40°C to +85°C |
| Storage Temperature |
-40°C to +85°C |
| Mechanical Life |
10 million operations (minimum) |
| Electrical Life |
100,000 operations (resistive load at rated load) |
| Weight |
Approx. 30 g |
Instructions:
Installation:
- Ensure the relay is installed in a well-ventilated area to prevent overheating.
- Mount the relay on a flat, stable surface to avoid mechanical stress.
Wiring:
- Connect the coil terminals to the appropriate power supply (24 VDC).
- Wire the common (COM), normally open (NO), and normally closed (NC) contacts according to your circuit requirements.
Operation:
- When voltage is applied to the coil, the relay will energize, switching the contacts from NC to NO.
- Ensure the load connected to the relay contacts does not exceed the rated current and voltage specifications.
Maintenance:
- Periodically inspect the relay for any signs of wear or damage.
- Clean the relay using a dry cloth; do not use solvents as they may damage the components.
Safety Precautions:
- Always disconnect power before performing any maintenance or installation.
- Do not exceed the maximum ratings specified to avoid damaging the relay.
(For reference only)
More detail about Utsource Holding Company Limited
