LM258DR TI SOP8: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Min	Typical	Max	Unit
Input Voltage Range	2.5	-	40	V
Output Voltage Range	-	-	40	V
Supply Current	-	1.6	3.6	mA
Quiescent Current	-	350	800	μA
Slew Rate	-	0.5	-	V/μs
Common-Mode Rejection	-	90	-	dB
Power-Supply Rejection	-	80	-	dB
Operating Temperature	-40	-	85	°C

Power Supply Connection:
- Connect the positive supply voltage to pin 8 (Vcc) and the negative supply voltage or ground to pin 4 (GND).
Input Signal:
- Apply the input signal to the non-inverting (pin 3) or inverting (pin 2) inputs as required by your circuit design.
Output Configuration:
- The output is taken from pin 1. Ensure proper load resistance is connected to avoid damage or performance issues.
Decoupling Capacitors:
- Place a 0.1 μF ceramic capacitor between Vcc and GND close to the device to minimize noise and transient effects.
Operating Temperature:
- Ensure that the operating temperature remains within the specified range (-40°C to +85°C) to maintain reliable operation.
Handling Precautions:
- The LM258DR is sensitive to electrostatic discharge (ESD). Use appropriate ESD protection measures during handling and installation.
Mounting:
- Follow standard surface-mount technology (SMT) procedures for mounting the SOP8 package on the PCB. Ensure proper soldering and alignment to prevent short circuits or poor connections.
Testing:
- After assembly, test the device under typical operating conditions to ensure it meets the expected performance parameters.

(For reference only)