NJM1496V: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc		-10		+30	V
Output Current (Short-Circuit)	Iout	Vo = 0V, T = 25°C		±30		mA
Input Offset Voltage	Vio	T = 25°C		2.0	6.0	mV
Input Bias Current	Ib	T = 25°C		80	400	nA
Input Offset Current	Ios	T = 25°C		20	150	nA
Large Signal Voltage Gain	Av	RL = 2kΩ, f = 1kHz	70	120	150	dB
Slew Rate	SR	RL = 2kΩ, Vpp = 2V		0.5	1.0	V/μs
Common Mode Rejection Ratio	CMRR	f = 60Hz	70	90	110	dB
Power Supply Rejection Ratio	PSRR	f = 60Hz	70	90	110	dB
Operating Temperature	Topr		-40		+85	°C

Power Supply Connection:
- Connect the power supply to the Vcc and GND pins ensuring that the voltage is within the specified range of -10V to +30V.
Input and Output Connections:
- Connect the input signal to the non-inverting (+) and inverting (-) input terminals.
- Ensure the output load resistance (RL) does not exceed the recommended values to maintain performance specifications.
Biasing and Stability:
- For optimal performance, use appropriate biasing networks and ensure stability by placing capacitors close to the power supply pins if necessary.
Operating Temperature:
- Operate the device within the temperature range of -40°C to +85°C to avoid damage and ensure reliable operation.
Handling Precautions:
- Handle with care to avoid electrostatic discharge (ESD) which can damage sensitive components.
- Avoid exceeding the maximum ratings listed in the parameter table to prevent damage to the device.
Testing:
- When testing the device, use the typical conditions provided in the parameter table to get accurate results. Adjust parameters as needed based on specific application requirements.

(For reference only)