Description
BUY EP910IPC-15 https://www.utsource.net/itm/p/12608896.html
| Parameter |
Description |
| Part Number |
EP910IPC-15 |
| Type |
Industrial Programmable Controller |
| Operating Voltage |
24V DC |
| Input Channels |
16 channels (Isolated) |
| Output Channels |
8 channels (Relay Outputs) |
| Communication Ports |
RS485, Ethernet |
| Memory |
512KB Program Memory, 1MB Data Memory |
| Temperature Range |
-20°C to +60°C |
| Humidity Range |
5% to 95% RH (non-condensing) |
| Dimensions |
120mm x 80mm x 40mm |
| Weight |
350g |
| Certifications |
CE, UL |
Instructions:
Installation:
- Ensure the operating environment is within the specified temperature and humidity ranges.
- Securely mount the controller in a suitable location away from direct heat sources and moisture.
Powering Up:
- Connect the power supply to the designated terminals ensuring correct polarity.
- Power up the system by applying 24V DC.
Connecting Inputs and Outputs:
- Wire the input devices to the appropriate input channels.
- Connect the load or output devices to the relay outputs ensuring they do not exceed the rated current.
Programming:
- Use the provided software development kit to program the controller according to your application requirements.
- Upload the program via the communication ports (RS485 or Ethernet).
Communication Setup:
- Configure the communication parameters for RS485 or Ethernet as required by your network setup.
- Ensure all devices on the network are properly configured for communication.
Maintenance:
- Regularly inspect connections and mounting hardware for signs of wear or damage.
- Keep the area around the controller clean and free of debris that could interfere with ventilation.
Troubleshooting:
- Refer to the troubleshooting section in the user manual for common issues and solutions.
- Contact technical support if problems persist.
(For reference only)
More detail about Utsource Holding Company Limited
