LM2831YMFX

LM2831YMFX

Category: Available (Qty:9999999)
For more information, visit our official website at utsource.us

Description

BUY LM2831YMFX https://www.utsource.net/itm/p/12608910.html

Parameter Symbol Min Typ Max Unit Description
Input Voltage VIN 2.9 - 5.5 V Operating input voltage range
Output Voltage VOUT 1.8 - 3.3 V Configurable output voltage
Output Current IOUT - 600 - mA Continuous output current
Quiescent Current IQ - 2.5 - μA Current consumption in operation
Shutdown Current ISD - 0.1 - μA Current consumption in shutdown
Dropout Voltage VDROPOUT - 250 - mV Voltage difference between VIN and VOUT at full load
Operating Temperature TOPR -40 - 85 °C Operating temperature range
Storage Temperature TSTG -65 - 150 °C Storage temperature range

Instructions for LM2831YMFX:

  1. Input Voltage Configuration: Ensure the input voltage is within the specified range (2.9V to 5.5V). Use appropriate decoupling capacitors close to the input pin to minimize noise.

  2. Output Voltage Setting: Adjust the output voltage using external resistors according to the formula provided in the datasheet. Typical configurations can set the output between 1.8V and 3.3V.

  3. Thermal Considerations: The device is designed to operate efficiently within its specified temperature range. Ensure adequate heat dissipation, especially under high load conditions.

  4. Shutdown Functionality: Utilize the shutdown pin to reduce power consumption when not in use. Applying a low signal to this pin will put the device into a low-power state.

  5. Capacitor Selection: Choose output capacitors with low ESR to maintain stability. Refer to the datasheet for recommended capacitor types and values.

  6. PCB Layout: Follow recommended PCB layout guidelines to ensure optimal performance and thermal management. Keep traces short and wide where possible, especially for power and ground connections.

  7. Handling Precautions: Handle the device with care to avoid damage from electrostatic discharge (ESD). Use proper ESD protection practices during handling and installation.

(For reference only)

More detail about Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited