AD8429ARZ: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vsupply		-16.5		+16.5	V
Input Offset Voltage	Vos	RTI, T = 25°C	±0.5			μV
Input Bias Current	Ib	RTI, T = 25°C	±3			pA
Input Voltage Noise	en	RTI, f = 1 kHz		1.9		nV/√Hz
Common-Mode Rejection Ratio	CMRR	T = 25°C		120		dB
Power-Supply Rejection Ratio	PSRR	T = 25°C		120		dB
Gain	AV	T = 25°C		1000		V/V
Bandwidth (-3 dB)	BW	G = 1000 V/V		80		kHz
Slew Rate	SR			0.4		V/μs
Output Voltage Swing	Vout	RL = 1 kΩ	-14.5		+14.5	V

Power Supply Connection:
- Connect the positive supply voltage (V+) to pin 8 and the negative supply voltage (V-) to pin 4.
- Ensure the supply voltage range is within -16.5V to +16.5V.
Input Configuration:
- Differential inputs are available at pins 2 (IN-) and 3 (IN+).
- Keep input signals within the common-mode input voltage range specified in the datasheet.
Output Configuration:
- The output is available at pin 6 (OUT).
- Ensure the load resistance is appropriate to avoid exceeding the output voltage swing limits.
Biasing and Decoupling:
- Place decoupling capacitors close to the power supply pins to minimize noise and ensure stable operation.
- Typical values are 0.1 μF and 10 μF ceramic capacitors.
Gain Adjustment:
- The AD8429ARZ has a fixed gain of 1000 V/V. No external components are required for gain setting.
Operating Temperature:
- The device is designed to operate within the temperature range of -40°C to +125°C.
Handling Precautions:
- Handle with care as ESD can damage the device.
- Follow proper grounding and handling procedures to prevent damage.
Testing and Troubleshooting:
- Verify all connections before powering the device.
- Monitor the supply voltages and input/output signals using an oscilloscope or multimeter during initial testing.

For detailed specifications and advanced configurations, refer to the official datasheet provided by Analog Devices.

(For reference only)