DS1010-200: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Description
Part Number	DS1010-200
Type	Digital Storage Oscilloscope
Bandwidth	100 MHz
Sample Rate	2 GSa/s (Giga Samples per second)
Memory Depth	20 Mpts (Mega Points)
Channels	2 analog channels
Vertical Resolution	8-bit
Horizontal Scale	2 ns to 500 s/div
Vertical Scale	1 mV to 10 V/div
Input Impedance	1 MΩ ±3% in parallel with 17 pF ±3 pF
Trigger Types	Edge, Pulse, Video, Pattern, Delay, Width, Transition, Timeout, State
Interface	USB 2.0, LAN
Power Supply	100-240 VAC, 47-63 Hz
Operating Temperature	0°C to 40°C
Dimensions	429 mm x 145 mm x 210 mm (W x H x D)
Weight	6.5 kg

Powering On:
- Connect the oscilloscope to a power source using the provided power cable.
- Press the power button on the front panel to turn on the device.
Connecting Probes:
- Insert the probe connectors into the appropriate input channels on the front panel.
- Adjust the probe settings via the menu if necessary.
Setting Up Channels:
- Use the channel buttons to enable or disable specific channels.
- Adjust the vertical and horizontal scales using the knobs or touchscreen interface.
Triggering:
- Select the desired trigger type from the menu.
- Adjust the trigger level and source as needed for stable waveform display.
Saving Data:
- Use the USB port to connect a storage device for saving waveforms and setup configurations.
- Navigate through the menu to save data to the connected device.
Connecting to PC:
- Use the USB or LAN interface to connect the oscilloscope to a computer.
- Install the provided software for remote control and data analysis.
Maintenance:
- Ensure the operating environment is within the specified temperature range.
- Clean the exterior with a soft, dry cloth; avoid using abrasive materials.
Troubleshooting:
- Refer to the user manual for troubleshooting common issues.
- Contact technical support if problems persist.

(For reference only)